Penerapan DFMEA pada Perancangan Produk Casing Lampu Berbahan Dasar Bambu

Erik Odi Wijaya, Sahrupi Sahrupi, Mohamad Jihan Sofa

Abstract


This research aims to discover the higest impact of product failures and determine the proper of solution. Design FMEA is a method to anticipate failure during the design stage by identifying all of the possible failures in a design or manufacturing process. This studi conducted in a micro, small and medium-sized enterprises (SMEs). KIM is a small company that produce handycraft product made from bamboo plants, one of the featured product is lamp casing. Any of customers complain encourage the company to make new product design and look for the cause of the problem and risk. The results of this  research  are obtained 5 components of lamp casing with the highest level of risk. An Improvement was carried out entirely by using a repair priority scale according to the sequence of failure modes with the highest risk of damage.


Keywords


product design; DFMEA; casing lamp; bamboo crafts

Full Text:

PDF

References


Aprianto, T., Setiawan, I., & Purba, H. H. (2021). Implementasi metode Failure Mode and Effect Analysis pada Industri di Asia – Kajian Literatur. Jurnal Manajemen & Teknik Industri – Produksi, 21(2), 165–174. https://doi.org/10.350587/Matrik

Atikno, W., Setiawan, I., & Taufik, D. A. (2021). Key Performance Indicators Implementation : Literature Review and Development for Performance Measurement. Indonesian Journal of Industrial Engineering & Management, 2(3), 189–197. https://doi.org/10.22441/ijiem.v2i3.12067

Belu, N., Anghel, D. C., & Rachieru, N. (2013). Application of Fuzzy Logic in Design Failure Mode and Effects Analysis. Applied Mechanics and Materials, 371(1), 832–836. https://doi.org/10.4028/www.scientific.net/AMM.371.832

Haryanti, D. M., & Hidayah, I. (2018). Potret UMKM Indonesia: Si Kecil yang Berperan Besar. https://www.ukmindonesia.id/baca-artikel/62 (Accessed: 17062018)

Kaukab, M. E. (2019). Implementasi Activity-Based Costing Pada UMKM. Journal of Economic, Management, Accounting and Technology, 2(1), 69–78. https://doi.org/10.32500/jematech.v2i1.576

Khoiroh, S. M. (2021). Supply chain risk management analysis of fresh water lobster cultivation indusSiti Muhimatul, K. (2021). Supply chain risk management analysis of fresh water lobster cultivation industry with FMEA approach. Operations Excellence: Journal of Applied Indust. Operations Excellence: Journal of Applied Industrial Engineering, 13(3), 321–329. https://doi.org/10.22441/oe.2021.v13.i3.030

Kolahdouzi, M., Gholam, H. H., Ebrahim, N. A., Maryam, R. A. S., & Mohsen, Y. avan. (2017). Use of failure mode and effects analysis in improving the safety of i.v. drug administration. American Journal of Health-System Pharmacy, 62(9), 917–920. https://doi.org/10.1093/ajhp/62.9.917

Kumru, M., & Kumru, P. Y. (2013). Fuzzy FMEA application to improve purchasing process in a public hospital. Applied Soft Computing, 13(1), 721–733. https://doi.org/10.1016/j.asoc.2012.08.007

Kurniawansyah, D. (2020). Kinerja UMKM di Kabupaten Jember : Studi Empiris Sebelum dan Sesudah Penerapan Metode Time-Driven Activity-Based Costing. Jurnal Riset Akuntansi Dan Bisnis Airlangga, 5(1), 834. https://doi.org/10.31093/jraba.v5i1.207

Manish, B., & Baishakhi, B. (2016). Design Failure Modes and Effect Analysis (DFMEA) & Human Powered Recumbent Vehicle. International Journal of Engineering Research & Technology, 5(4), 27–32. https://doi.org/10.17577/IJERTV5IS040105

Qin, J., Xi, Y., & Pedrycz, W. (2020). Failure mode and effects analysis (FMEA) for risk assessment based on interval type-2 fuzzy evidential reasoning method. Applied Soft Computing Journal, 89, 106134. https://doi.org/10.1016/j.asoc.2020.106134

Renjith, V. R., Jose Kalathil, M., Kumar, P. H., & Madhavan, D. (2018). Fuzzy FMECA (failure mode effect and criticality analysis) of LNG storage facility. Journal of Loss Prevention in the Process Industries, 537–547. https://doi.org/10.1016/j.jlp.2018.01.002

Setiawan, I., Purba, H. H., & Debora, F. (2020). A systematic literature review of implementation six sigma in manufacturing industries. Operations Excellence: Journal of Applied Industrial Engineering, 12(3), 319. https://doi.org/10.22441/oe.2020.v12.i3.005

Stamatis, D. H. (1995). Failure Mode and Effect Analysis FMEA from Theory to Execution. ASQC Quality Press.

Sugiyono. (2017). Metode Penelitian Kuantitatif, Kualitatif, dan R&D (1st ed.). CV Alfabeta.

Supriyati, & Hasbullah. (2020). Analisa cacat painting komponen automotive dengan pendekatan DMAIC-FMEA. Operations Excellence: Journal of Applied Industrial Engineering, 12(1), 104–116. https://doi.org/10.22441/oe.2020.v12.i1.009




DOI: http://dx.doi.org/10.22441/oe.2022.v14.i1.039

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Operations Excellence: Journal of Applied Industrial Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal ISSN:

Portal ISSNPrint ISSN: 2085-4293
Online ISSN: 2654-5799

Tim Editorial Office
Operations Excellence: Journal of Applied Industrial Engineering
Magister Teknik Industri Universitas Mercu Buana
Jl. Raya Meruya Selatan No. 1 Kembangan Jakarta Barat
Email: [[email protected]]
Website: http://publikasi.mercubuana.ac.id/index.php/oe
Journal DOI: 10.22441/oe

The Journal is Indexed and Journal List Title by:

                 

 

 

Operations Excellence: Journal of Applied Industrial Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.