Email this article Models of supply chain management in the efforts to develop the banyumasan batik industry
Abstract
Inventory of raw materials is one of the crucial problems in the company. Errors in determining the size of raw material inventory is very influential for the smooth production of the company. PT Semen Bosowa Maros is a private company that focuses on cement production. This study aims to avoid excess and shortage of raw materials by calculating the amount of raw material inventory at PT Semen Bosowa Maros. This study uses the Min-Max Stock method. The research data was obtained from the company's annual data with related parties. The results of the study obtained safety stock values of Silica Sand 166.46 ton’s, Gypsum 1482.96 ton’s, Fly Ash 33.71 ton’s, and Trass 30.76 ton’s. Then, the minimum inventory calculation is carried out, it is known that the minimum inventory results are found in Trass raw materials of 260.18 ton’s while the results for maximum inventory are in Gypsum of 22117.18 ton’s. After calculating the min-max, an order policy can be obtained for each material, Silica Sand 1074.85 ton’s, Gypsum 9575.63 ton’s, Fly Ash 217.68 ton’s, and Trass 198.65 ton’s.
Keywords
Full Text:
PDFReferences
Indrajit, Richardus Eko. Richardus Djokopranoto. 2005. Strategi Manajemen Pembelian dan Supply Chain. Penerbit. PT Gramedia Widiasarana Indonesia, Jakarta.
Indrajit, Richardus Eko. 2006. Konsep Manajeman Supply Chain: Cara Baru Memandang Mata Rantai Penyediaan Barang. Penerbit. PT Gramedia Widiasarana Indonesia, Jakarta.
Kusumawati, Endar. 2004. Analisis Faktor-Faktor Yang Mempengaruhi Kinerja Ekspor UKM Dengan Lingkungan Sebagai Variabel Moderating (Studi Kasus pada Industri Furniture di Kabupaten Jepara. Undip.ac.id.
Marcely Susanty, Tri Wahyu Ningsih, Muhammad Faizin Rissa. 2019. Analysis of Customer Satisfaction with Importance Performance Analysis (IPA) Method in One of the Banking Industries. International Journal of Innovative Science and Research Technology. Vol.4, 421-425
Mulyono, F. 2011. Demand Chain Management: Supply Chain Management + Orientasi Pasar. Jurnal Administrasi Bisnis. Vol 7, No. 1, Fisip Unpar. Hal 59-72
Probowati, A. 2011. Strategi Pemilihan Supplier Dalam Supply Chain Management Pada Bisnis Ritel. Segmen Jurnal Manajemen dan Bisnis. No 1. Janu. 65- 82.
Putri, C.F. 2012. Pemilihan Supplier Bahan Baku Kertas Dengan Model QCDFR dan Analytical Hierarchy Process (AHP). Jurnal Widya Teknika. Vol. 20. No. 20, Oktober 2012. Hal 32-38.
Retnawati, Berta Bekti. Agustine Eva Maria Soekesi. 2010. Model Supply Chain Produk Usaha Kecil (Studi Kasus Pada Kampoeng Batik Laweyan Surakarta). Universitas Katolik Soegijapranata. Eprints.unika.ac.id
Rahmasari, L. 2011. Pengaruh Supply Chain Terhadap Kinerja Perusahaan dan Keunggulan Bersaing (Studi Kasus pada Industri Kreatif di Provinsi Jawa Tengah). Majalah Ilmiah Informatika.Vol. 2 No. 3, September 2011. Hal 89-103.
Saaty, TL. 2000. How to Make a Decision: The Analytic Hierarchy process. European Journal Of Operation Research.Vol. 48 (1), 9-26.
Soebagiyo, Daryono. 2008. Analisis Kompetensi Produk Unggulan Daerah Pada Batik Tulisdan Cap Solo Di DATI II Kota Surakarta. Jurnal Ekonomi Pembangunan. Vol. 9, No. 2, Desember. ums.ac.id (28-3-2014).
Soekesi, A.E.M. Retnawati, B.B. 2010. Model Supply Chain Produk Usaha Kecil (Studi Kasus Pada Kampoeng Batik Laweyan Surakarta). Jurnal Dinamika Sosial Ekonomi. Vol. 6. No. 2. Hal 210-220.
Sudantoko, D. 2010. Pengembangan Industri Batik Skala Kecil Di Kabupaten Dan Kota Pekalongan Dengan Pendekatan Analysis Hierarchy Process (AHP). Jurnal Prestasi Vol. 6. No.1- Juni 2010. P3M STIE Bank BPD Jateng. Hal 1-17.
Sartika, I. 2009. Pengembangan Model Rantai Pasok Produk Mudah Rusak Dengan Mempertimbangkan Kualitas. Ipdn.ac.id.
Sujadi. Edi Priyono. Fereshti N.D. 2008. Membangun Sinergi Bagi Pengembangan Produk UKM Berbasis Ekspor DI Klaster UKM, Serenan, Klaten. Seminar Nasional Aplikasi Sains dan Teknologi. IST AKPRIND Yogjakarta. Repository.akprind.ac.id (5-4-2014).
Utomo, D. 2012. Strategi Pendekatan Supply Chain Management Pada Proses Produksi Dan Saluran Distribusi Terhadap Agroindustri Mangga Di Kabupaten Probolinggo. Jurnal yudharta.ac.id.
Weiss, S., Proudler, I. K., Coutts, F. K., & Khattak, F. A. (2023). Eigenvalue Decomposition of a Parahermitian Matrix: Extraction of Analytic Eigenvectors. IEEE Transactions on Signal Processing, 71(1), 1642–1656. https://doi.org/10.1109/TSP.2023.3269664
Widayati, Endang P. 2012. Analisis Fleksibilitas Supply Chain Perusahaan Rokok PR Lee Choir di Sidoarjo. Jurnal Tekmapro. Ejournal.upnjatim.ac.id. (5-4-2014).
Wulandari, N. 2014. Perancangan Sistem Pendukung Keputusan Pemilihan Supplier di PT. Alfindo Dengan Metode Analytical Hierarchy Process (AHP). Jurnal Sistem Informasi. Vol. 1. No. 1. Hal 4-7.
Yusuf, M. 2009. Pendekatan Analytic Hierarchy Process dan Goal Programming untuk Menentukan Model Pemasok. Jurnal Teknologi. Vol. 2. No. 2 Desember 2009. Hal 137-142.
DOI: http://dx.doi.org/10.22441/oe.2023.v15.i2.086
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Operations Excellence: Journal of Applied Industrial Engineering
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal ISSN:
 | Print ISSN: 2085-4293 |
|---|---|
| Online ISSN: 2654-5799 |
Tim Editorial Office
Operations Excellence: Journal of Applied Industrial Engineering
Magister Teknik Industri Universitas Mercu Buana
Jl. Raya Meruya Selatan No. 1 Kembangan Jakarta Barat
Email: [[email protected]]
Website: http://publikasi.mercubuana.ac.id/index.php/oe
Journal DOI: 10.22441/oe
The Journal is Indexed and Journal List Title by:
.png)
.png)
.png)
Operations Excellence: Journal of Applied Industrial Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.