Email this article 
Sigma level choice examination in executing incline Lean Six Sigma (LSS) within the material and item material industry
Abstract
Many manufacturing industries in the world use the Lean Six Sigma (LSS) approach in analyzing and improving waste activities and reducing production defects. The Textile and Product Textile (TPT) industry can also be easily implemented because this industry is a labor-intensive industry. However, in its development, no one has analyzed the sigma level in the TPT industry by reviewing studies. The sigma level obtained from various sources and various types of TPT industries cannot yet be concluded about the sigma level value for each type of industry. This research points to look at writing articles related to LSS, particularly within the TPT industry. This inquire about employments the clustering strategy, specifically a refinement research strategy taken within the TPT industry within the writing review. This ask around found dispersions of 55 articles that were effectively studied inside the composing with the Six Sigma technique being the preeminent broadly utilized and more explore objects based on the tall quality of 41 articles. Gathering by industry section is the piece of clothing industry with 14 articles that reinforce the LSS. In the interim, based on nation groupings, the biggest number is Indonesia with 19 articles. It is trusted that this inquire about commitment can ended up a reference for anybody who will utilize LSS within the fabricating industry.
Keywords
Full Text:
PDFReferences
Abbes, N., Ser, C., & Sci, M. (2018). Application of Six Sigma in Clothing SMEs : A case study Application of Six Sigma in Clothing SMEs : A case study. https://doi.org/10.1088/1757-899X/460/1/012009
Abdullah, A., Saraswat, S., & Talib, F. (2023). Impact of Smart, Green, Resilient, and Lean Manufacturing System on SMEs’Performance: A Data Envelopment Analysis (DEA) Approach. Sustainability (Switzerland), 15(2), 1–26. https://doi.org/10.3390/su15021379
Achmad, M. (2012). Analisis Pengendalian Kualitas Produk Dengan Metode Six Sigma Pada Harian Tribun Timur. Penerapan Pengendalian Mutu.
Adikorley, R. D., Rothenberg, L., & Guillory, A. (2017). Lean Six Sigma applications in the textile industry: a case study. International Journal of Lean Six Sigma, 8(2). https://doi.org/10.1108/ijlss-03-2016-0014
Ahmed, F. (2019). Implementation of Six Sigma to Minimize Defects in Sewing Section of Apparel Industry in Bangladesh. Global Journal of Researches in Engineering, 19(3), 1–14.
Ahmed, N. M., Sharief, M. A. El, & Nasr, A. B. A. (2015). Implement Lean Thinking in Automotive Service Centers to Improve Customers’ Satisfaction. International Journal of Scientific & Engineering Research, 6(6), 576–583.
Ahmmed, A. S., & Ayele, M. (2020). In-Depth Analysis and Defect Reduction for Ethiopian Cotton Spinning Industry Based on TQM Approach. Hindawi Journal of Engineering, 20(1), 1–8.
Alcácer, V., & Cruz-Machado, V. (2019). Scanning the Industry 4.0: A Literature Review on Technologies for Manufacturing Systems. Engineering Science and Technology, an International Journal, 22(3), 899–919. https://doi.org/10.1016/j.jestch.2019.01.006
Alkatiri, H. A., Adianto, H., & Novirani, D. (2015). Implementation of Control To Reduce The Number Of Defective Products Of Cotton Fabric Textiles Using The Six Sigma Method At Pt. SSP. Jurnal Online Institut Teknologi Nasional, Vol 03(03), 148–159.
Amira, L., & Nejib, S. (2021). Study of parameters influencing the production and improvement of the launch system in a production department: Case study in the clothing industry in tunisia. Fibres and Textiles in Eastern Europe, 29(6–150), 4–10. https://doi.org/10.5604/01.3001.0015.2715
Bakar, A., Suprianto, O., & Yuniati, Y. (2017). Proposed Productivity Improvement Based on Mundel and APC Methods at PT Raffsya Media. Journal of Industrial Engineering Management, 4(3), 212–226. https://doi.org/10.33536/jiem.v2i2.147
Bharath, S., Arvind, V., & Prashanth, A. (2017). Minimizing Reworks , Rejection Rate and Time Waste in a Textile Industry Using Sixsigma Tools. 5(2), 70–75. https://doi.org/10.21276/sjet.2017.5.2.7
Bhargava, M. (2019). Process Improvement in Textile Industry using Six Sigma. International Journal for Research in Applied Science and Engineering Technology, 7(12), 136–141. https://doi.org/10.22214/ijraset.2019.12023
Boon Sin, A., Zailani, S., Iranmanesh, M., & Ramayah, T. (2015). Structural equation modelling on knowledge creation in Six Sigma DMAIC project and its impact on organizational performance. International Journal of Production Economics, 168, 105–117. https://doi.org/10.1016/j.ijpe.2015.06.007
Bustommy, A. Y., Saroso, D. S., & Hasibuan, S. (2021). Improving the quality of IndiHome services using six sigma DMAIC method: Case in industrial area. Mercu Buana University.
Carvalho, C. P., Carvalho, D. S., & Silva, M. B. (2019). Value stream mapping as a lean manufacturing tool: A new account approach for cost saving in a textile company. International Journal of Production Management and Engineering, 7(1), 1. https://doi.org/10.4995/ijpme.2019.8607
Chitichotpanya, C., Khwanmuang, P., Yamprayoonswat, W., Porntheeraphat, S., Jongkaewwattana, A., & Chitichotpanya, P. (2022). Potent environmental-friendly virucidal medical textiles against coronavirus to combat infections during the COVID-19 pandemic. Journal of Industrial Textiles, 0(0), 1–18. https://doi.org/10.1177/15280837221094649
Christoper, C., & Suliantoro, H. (2015). Analisa Pengendalian Kualitas dengan Menggunakan Metode Six Sigma untuk Part NXS-001 pada PT Inti Pantja Press Industri. None.
Dagne, T. B. (2023). Productivity Improvement Through Customized Lean and Six Sigma for Garment Manufacturing Industries. Journal of Optimization in Industrial Engineering, 16(1), 9–17. https://doi.org/10.22094/JOIE.2022.1904036.1763
Dey, P. R., Shaim, M., & Injamamul, H. (2020). Six sigma DMAIC approach with uncertainty quantification and propagation in garments industry RECEIVED. 70–83.
Dinulescu, Ruxandra Dima, A. (2019). Improving Performance in Romanian Garment Industry by Using the Lean Six Sigma Methodology. Proceding of the 13th International Management Conference “Management Strategies for High Performance, 711–721.
Elboq, R., Fri, M., Hlyal, M., & El Alami, J. (2023). Modeling Lean and Six Sigma Integration using Deep Learning: Applied to a Clothing Company. Autex Research Journal, 23(1), 1–10. https://doi.org/10.2478/aut-2021-0043
Engelseth, P., & Gundersen, D. (2018). Lean and complex systems: A case study of materials handling at an on-land warehouse facility supporting subsea gas operations. International Journal of Design and Nature and Ecodynamics, 13(2), 199–207. https://doi.org/10.2495/DNE-V13-N2-199-207
Fithri, P. (2019). Six Sigma as a Quality Control Tool in PT Unitex, Tbk. Raw Fabric Production. J@ti Undip : Jurnal Teknik Industri. https://doi.org/10.14710/jati.14.1.43-52
Hanbay, K., Talu, M. F., & Özgüven, Ö. F. (2016). Fabric defect detection systems and methods—A systematic literature review. Optik, 127(24), 11960–11973. https://doi.org/10.1016/j.ijleo.2016.09.110
Hardono, V., Dewa, P. K., & Kurnia, H. (2023). Analisa Pemilihan Pemasok Tanah Liat Dalam Perbaikan Kualitas Pada UMKM Kerajinan Gerabah. J@Ti Undip, 18(43), 190–201. https://doi.org/10.14710/jati.18.3.190-201
Haviana, E., & Hernadewita, H. (2019). Productivity improvement in the rubber production process using value stream mapping method to eliminate waste. Operations Excellence: Journal of Applied Industrial Engineering, 11(2), 119. https://doi.org/10.22441/oe.v11.2.2019.023
Hayajneh, M., Bataineh, O., & Altawil, R. (2020). Applying Six Sigma Methodology Based On “ DMAIC ” Tools to Reduce Production Defects in Textile Manufacturing. 19–24.
Henny, H., Agnia, N., & Hardianto, H. (2019). Analysis Quality Control of Carded and Combed Yarns Using Six Sigma Method. IOP Conference Series: Materials Science and Engineering, 662(6), 1–9. https://doi.org/10.1088/1757-899X/662/6/062008
Hutama, A. S. (2022). Studi Pemanfaatan Limbah Material Polypropilene (PP) untuk Pembuatan Produk Cone Benang dengan Penambah Material Kalsium Karbonat. Jurnal Rekayasa Sistem Industri, 11(1), 101–108. https://doi.org/10.26593/jrsi.v11i1.5288.101-108
Jaqin, C., Kurnia, H., Purba, H. H., Molle, T. D., & Aisyah, S. (2023). Lean Concept to Reduce Waste of Process Time in the Plastic Injection Industry in Indonesia. Nigerian Journal of Technological Development, 20(2), 73–82. https://doi.org/10.4314/njtd.v18i4.1396
Kaneku-Orbegozo, J., Martinez-Palomino, J., Sotelo-Raffo, F., & Ramos-Palomino, E. (2019). Applying Lean Manufacturing Principles to reduce waste and improve process in a manufacturer: A research study in Peru. IOP Conference Series: Materials Science and Engineering, 689(1). https://doi.org/10.1088/1757-899X/689/1/012020
Karabulut, M., & Yildiz Kumru, P. (2019). Six Sigma Methodology and an Application in the Textile Sector. Kocaeli Journal of Science and Engineering, 2(1), 7–20. https://doi.org/10.34088/kojose.453692
Kaswan, M. S., & Rathi, R. (2019). Analysis and modeling the enablers of Green Lean Six Sigma implementation using Interpretive Structural Modeling. Journal of Cleaner Production, 231, 1182–1191. https://doi.org/10.1016/j.jclepro.2019.05.253
Kaswan, M. S., & Rathi, R. (2020). Green Lean Six Sigma for sustainable development: Integration and framework. Environmental Impact Assessment Review, 83(November 2019), 106396. https://doi.org/10.1016/j.eiar.2020.106396
Khan, S. I., Sushil, S., & Tushar, S. R. (2020). Minimization of Defects in the Fabric Section Through Applying DMAIC Methodology of Six Sigma: A Case Study. 9(July), 16–24.
Kumar, P., Khan, M. A., Mughal, U. K., & Kumar, S. (2020). Exploring the potential of six sigma ( DMAIC ) in minimizing the production defects. International Conference on Industrial & Mechanical Engineering and Operations Management, 1(12), 1–11.
Kurnia, H., & Hardi Purba, H. (2021). A Systematic Literature Review of Lean Six Sigma in Various Industries. Journal of Engineering and Management in Industrial System, 9(2), 19–30. https://doi.org/10.21776/ub.jemis.2021.009.002.3
Kurnia, H., Irwati, D., Makmudah, S., & Sofani, I. (2023). Production Control Using the Kanban System in the Manufacturing Industry in Indonesia : Systematic Literature Review International Conference International Conference. 1st Pelita International Conference, 01(01), 46–59. volhttps://jurnal.pelitabangsa.ac.id/index.php/pic
Kurnia, H., Jaqin, C., & Manurung, H. (2022). Implementation of the DMAIC Approach for Quality Improvement at the Elastic Tape Industry. J@ti Undip: Jurnal Teknik Industri, 17(1), 40–51. https://doi.org/10.14710/jati.17.1.40-51
Kurnia, H., Jaqin, C., & Purba, H. H. (2022a). Quality improvement with PDCA approach and design of experiment method in single socks industry in Indonesia. International Conference on Informatics, Technology, and Engineering 2021 (InCITE), 2470(1), 1–12. https://doi.org/10.1063/5.0080179
Kurnia, H., Jaqin, C., & Purba, H. H. (2022b). Quality Improvement with the DMAIC Approach Using the Implementation of Benchmarking and KPI Methods. Industrial Engineering and Operations Management (IEOM), 2(9), 2122–2133. http://ieomsociety.org/proceedings/2021indonesia/400.pdf
Kurnia, H., Jaqin, C., & Purba, H. H. (2022c). The PDCA Approach with OEE Methods for Increasing Productivity in the Garment Industry. Jurnal Ilmiah Teknik Industri : Jurnal Keilmuan Teknik Dan Manajemen Industri, 10(1), 57–68. https://doi.org/10.24912/jitiuntar.v10i1.15430
Kurnia, H., Jaqin, C., Purba, H. H., & Setiawan, I. (2021). Implementation of Six Sigma in the DMAIC Approach for Quality Improvement in the Knitting Socks Industry. Tekstilvemuhendis, 28(124), 269–278. https://doi.org/10.7216/1300759920212812403
Kurnia, H., Manurung, H., Suhendra, S., & Juliantoro, K. B. (2023). Implementation of Lean Service Approaches to Improve Customer Satisfaction and Sustainability of Health Equipment Procurement Process at Hospitals. Quality Innovation Prosperity, 15(3), 1–17. https://doi.org/10.12776/QIP.V27I3.1875
Kurnia, H., Setiawan, I., & Hernadewita. (2022). Integration of Lean and Green Manufacturing to reduce Process Waste and Employee Recruitment Paper Waste in the Manufacturing Industry in Indonesia. Jurnal Rekayasa Sistem Industri, 11(2), 145–156. https://doi.org/https://doi.org/10.26593/jrsi.v11i2.5608
Kurnia, H., Tumanggor, O. S. P., & Jaqin, C. (2021). Lean Six Sigma: Literature Review and Implementation for Textile and Textile Product (TTP) Industries. 3rd Mercu Buana Conference on Industrial Engineering-MBCIE 2021, 1–11.
Kurnianingtias, M., Wibowo, T. A., Khairunnisa, H., Astrini, G. Y., & Purwanningrum, D. (2024). Cycle Time Study in Improving Production Output in the Garment Industry Sewing Line. Jurnal Sains Dan Aplikasi Keilmuan Teknik Industri (SAKTI), 4(1), 47–54. https://doi.org/10.33479/sakti.v4i1.91
Kurniawan, A. R., & Prestianto, B. (2020). Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP. Jemap. https://doi.org/10.24167/jemap.v3i1.2632
Lajoie, P., Gaudreault, J., Lehoux, N., & Ali, M. Ben. (2019). A data-driven framework to deal with intrinsic variability of industrial processes: An application in the textile industry. IFAC-PapersOnLine, 52(13), 731–736. https://doi.org/10.1016/j.ifacol.2019.11.202
Limonur Rahman Lingkon, M., Krishna Saha, P., Al Manzid, A., Nazmul Hasan, M., & Kishore Mahalanobish, S. (2024). International Journal of Research in Industrial Engineering Reducing Sewing Defects to Increase Productivity in the Apparel Industry of Bangladesh by Integrating Lean Methodology Citation. Int. J. Res. Ind. Eng, 13(2), 166–187. https://doi.org/10.22105/riej.2024.445868.1424
Manan, A., Handika, F. S., & Nalhadi, A. (2018). Usulan Pengendalian Kualitas Produksi Benang Carded dengan Metode Six Sigma. Jurnal INTECH Teknik Industri Universitas Serang Raya. https://doi.org/10.30656/intech.v4i1.856
Maralcan, A., & Ilhan, I. (2017). Operations management tools to be applied for textile. IOP Conference Series: Materials Science and Engineering, 254(20). https://doi.org/10.1088/1757-899X/254/20/202005
Maria, A., Eufrasio, M., De, D. B., Junior, M. F., Leandro, I., Rodriguez, R., & Nascimento, H. R. (2019). Applying the Lean Concept through the VSM Tool in Maintenance Processes in a PIM Manufacture. International Journal of Advanced Engineering Research and Science (IJAERS), 6(7), 137–143. https://doi.org/https://dx.doi.org/10.22161/ijaers.6717
Martinez-Condor, B., Mamani-Motta, F., Macassi-Jaurequi, I., Raymundo-Ibañez, C., & Perez, M. (2020). Lean Production Model Aligned with Organizational Culture to Reduce Order Fulfillment Issues in Micro- and Small-sized Textile Businesses in Peru. IOP Conference Series: Materials Science and Engineering, 796(1). https://doi.org/10.1088/1757-899X/796/1/012016
Mohan Prasad, M., Dhiyaneswari, J. M., Ridzwanul Jamaan, J., Mythreyan, S., & Sutharsan, S. M. (2020). A framework for lean manufacturing implementation in Indian textile industry. Materials Today: Proceedings, 33, 2986–2995. https://doi.org/10.1016/J.MATPR.2020.02.979
Mothilal, B., & Prakash, C. (2019). Implementation of Lean Tools in Apparel Industry to Improve Productivity Fashion Technology & Textile Engineering Implementation of Lean Tools in Apparel Industry to Improve Productivity and Quality. July 2018. https://doi.org/10.19080/CTFTTE.2018.04.555628
Mukhopadhyay, A. R. (2015). Reduction of Yarn Packing Defects Using Six Sigma Methods : A Case Study. Quality Engineering, 1(12), 1–14. https://doi.org/10.1080/08982110600567533
Nørup, N., Pihl, K., Damgaard, A., & Scheutz, C. (2019). Quantity and quality of clothing and household textiles in the Danish household waste. Waste Management, 87, 454–463. https://doi.org/10.1016/j.wasman.2019.02.020
Nurprihatin, F., Yulita, N. E., & Caesaron, D. (2017). Proposed Reducing Waste in the Sewing Process Using the Lean Six Sigma Method. Profesionalisme Akuntan Menuju Sustainable Business Practice, 4(3), 809–818.
Palange, A., & Dhatrak, P. (2021). Lean manufacturing a vital tool to enhance productivity in manufacturing. Materials Today: Proceedings, 46(2), 729–736. https://doi.org/10.1016/j.matpr.2020.12.193
Pereiraa, M. T., Bentoa, M. I., L. P. Ferreiraa, Sá, J. C., Silvaa, F. J. G., & Baptista, A. (2019). Using Six Sigma to analyse Customer Satisfaction at the product design and development stage. 29th International Conference on Flexible Automation and Intelligent Manufacturing, 38(2019), 1608–1614. https://doi.org/10.1016/j.promfg.2020.01.124
Prahara, A. G., & Nawangpalupi, C. B. (2021). Integrasi Manajemen Perubahan pada Proyek Lean Six Sigma dalam Peningkatan Mutu dan Kinerja Perusahaan. Jurnal Rekayasa Sistem Industri, 10(2), 113–120. https://doi.org/10.26593/jrsi.v10i2.4064.113-120
Pratiwi, A. I., Husna, S., & Syukri, A. (2016). Lean Six Sigma (DMAIC) and Cumulative Sum Method Approaches to Improve the Quality of Gray Fabric in the Shuttle II Department (Case Study at PT GKBI Yogyakarta). Seminar Nasional IENACO –, 213(53), 1689–1699.
Prayugo, J., & Zhong, L. X. (2021). Green productivity: Waste reduction with green value stream mapping. A case study of leather production. International Journal of Production Management and Engineering, 9(1), 11–16. https://doi.org/10.4995/IJPME.2021.12254
Purnama, D. A., Shinta, R. C., & Helia, V. N. (2018). Quality improvements on creative industry by using Six Sigma: A study case. MATEC Web of Conferences, 154. https://doi.org/10.1051/matecconf/201815401088
Putri, A. S., & Primananda, F. (2021). Quality Control on Minimizing Defect Product on 20 OE Yarn. Jurnal Ilmiah Teknik Industri, 20(1), 81–88. https://doi.org/10.23917/jiti.v20i1.12443
Raj, S., & Handayati, Y. (2024). Enhancing Quality Management and Continuous Improvement Strategies in Polyester Yarn Production Using Lean Six Sigma DMAIC Methodology : A Case Study of PT Logachan Tekstil. American International Journal of Business Management (AIJBM), 07(08), 189–207. https//aijbm.com
Raja Sreedharan, V., & Raju, R. (2016). A systematic literature review of Lean Six Sigma in different industries. International Journal of Lean Six Sigma, 7(4), 430–466. https://doi.org/10.1108/IJLSS-12-2015-0050
Roesmasari, R. A., Santoso, I., & Sucipto, S. (2018). Leather Quality Improvement Strategy With Lean Six Sigma And Fuzzy Fmea Methods (Case Study In Sumber Rejeki). Jurnal Teknologi Pertanian, 19(3), 183–192. https://doi.org/10.21776/ub.jtp.2018.019.03.5
Sakti, S., Sopha, B. M., & Saputra, E. S. T. (2021). Energy Efficiency Analysis in a Textile Company Using DMAIC Approach. IOP Conference Series: Materials Science and Engineering, 1096(1), 012007. https://doi.org/10.1088/1757-899x/1096/1/012007
Santos, G., Carlos, J., Ricardo, S., Pulido, J., Jimenez, G., Santos, G., Pulido, J., & Hernández, H. (2019). Improvement of Productivity and Quality in the Value Chain through Lean Manufacturing – a case study. 8th Manufacturing Engineering Society International Conference, 41, 882–889. https://doi.org/10.1016/j.promfg.2019.10.011
Shafira, Y. P., & Mansur, A. (2018). Production quality improvement analysis of grey cambric using Six Sigma Method. MATEC Web of Conferences, 154, 0–3. https://doi.org/10.1051/matecconf/201815401090
Sihombing, M. I. S., & Sumartini, S. (2017). Effect of Raw Material Quality Control and Production Process Quality Control on the Quantity of Defective Products and Its Impact on Quality Costs (Cost of Quality). Jurnal Ilmu Manajemen Dan Bisnis. https://doi.org/10.17509/jimb.v8i2.12665
Simanová, Ľ., Sujová, A., & Gejdoš, P. (2019). Improving the Performance and Quality of Processes by Applying and Implementing Six Sigma Methodology in Furniture Manufacturing ProcessPoboljšanje izvedbe i kvalitete procesa proizvodnje namještaja primjenom metodologije Six Sigma. Drvna Industrija. https://doi.org/10.5552/drvind.2019.1768
Siregar, I., Nasution, A. A., Andayani, U., Sari, R. M., Syahputri, K., & Anizar. (2018). Lean manufacturing analysis to reduce waste on production process of fan products. IOP Conference Series: Materials Science and Engineering, 308, 1–8. https://doi.org/10.1088/1757-899X/308/1/012004
Sjarifudin, D., & Kurnia, H. (2022). The PDCA Approach with Seven Quality Tools for Quality Improvement Men’s Formal Jackets in Indonesia Garment Industry. Jurnal Sistem Teknik Industri (JSTI), 24(2), 159–176. https://doi.org/10.32734/jsti.v24i2.7711
Sjarifudin, D., Kurnia, H., Purba, H. H., & Jaqin, C. (2022). Implementation of the six sigma approach for increasing the quality of formal men’s jackets in the garment industry. Jurnal Sistem Dan Manajemen Industri, 6(1), 33–44. https://doi.org/10.30656/jsmi.v6i1.4359
Sukma, D. I., Prabowo, H. A., Setiawan, I., Kurnia, H., & Maulana, I. (2022). Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy. International Journal of Engineering, 35(7), 1246–1256. https://doi.org/10.5829/ije.2022.35.07a.04
Sukwadi, R., Felicia, Y., & Muafi. (2021). TOC, lean, and six sigma: An integrated model to increase the productivity of the textile industry. Journal of Mechanical Engineering Research and Developments, 44(1), 327–336.
Suwanich, T., & Chutima, P. (2017). Process Improvement of Reactive Dye Synthesis Using Using Six Sigma Concept. IOP Conference Series: Materials Science and Engineering, 215(1). https://doi.org/10.1088/1757-899X/215/1/012006
Syafwiratama, O., Hamsal, M., & Purba, H. H. (2017). Reducing the nonconforming products by using the six sigma method: A case study of a polyester short cut fiber manufacturing in Indonesia. Management Science Letters, 7(3), 153–162. https://doi.org/10.5267/j.msl.2016.12.001
Tannady, H., Gunawan, E., Nurprihatin, F., & Wilujeng, F. R. (2019). Process improvement to reduce waste in the biggest instant noodle manufacturing company in South East Asia. Journal of Applied Engineering Science, 17(2), 203–212. https://doi.org/10.5937/jaes17-18951
Tjandra, S. S., Utama, N. S., & Fransiscus, H. (2018). Penerapan Metoda Six Sigma DMAIC untuk Mengurangi Cacat Pakaian 514 (Studi Kasus di CV Jaya Reksa Manggala). Jurnal Rekayasa Sistem Industri. https://doi.org/10.26593/jrsi.v7i1.2716.31-40
Uluskan, M., Godfrey, A. B., & Joines, J. A. (2017). Integration of Six Sigma to traditional quality management theory: an empirical study on organisational performance. Total Quality Management and Business Excellence, 28(13–14), 1526–1543. https://doi.org/10.1080/14783363.2016.1150173
Uluskan, M., McCreery, J. K., & Rothenberg, L. (2018). Impact of quality management practices on change readiness due to new quality implementations. International Journal of Lean Six Sigma, 9(3), 351–373. https://doi.org/10.1108/IJLSS-05-2017-0049
Vermaelen, N., & Kovach, J. V. (2021). Driving meeting effectiveness through organizational process improvement—A Lean Six Sigma case study. Organizational Dynamics, 2019, 100827. https://doi.org/10.1016/j.orgdyn.2021.100827
Wiyatno, T. N., Kurnia, H., Zulkarnaen, I., & Nuryono, A. (2024). How Influenced Management Behavior is on the Implementation of Total Quality Management (TQM) and Company Operational Performance. International Journal of Industrial Engineering and Management, 15(3), 225–237. https://doi.org/10.24867/IJIEM-2024-3-359
Yadav, G., Luthra, S., Huisingh, D., Mangla, S. K., Narkhede, B. E., & Liu, Y. (2020). Development of a lean manufacturing framework to enhance its adoption within manufacturing companies in developing economies. Journal of Cleaner Production, 245(10), 1–34. https://doi.org/10.1016/j.jclepro.2019.118726
Zahrotun, N., & Taufiq, I. (2018). Lean Manufacturing: Waste Reduction Using Value Stream Mapping. E3S Web of Conferences, 73(1), 2–7. https://doi.org/10.1051/e3sconf/20187307010
Zaman, D. M., & Zerin, N. H. (2017). Applying DMAIC Methodology to Reduce Defects of Sewing Section in RMG: A Case Study. American Journal of Industrial and Business Management, 07(12), 1320–1329. https://doi.org/10.4236/ajibm.2017.712093
Zulkarnaen, I., Kurnia, H., Saing, B., & Nuryono, A. (2023). Reduced painting defects in the 4-wheeled vehicle industry on product type H-1 using the lean six sigma-DMAIC approach. Jurnal Sistem Dan Manajemen Industri (JSMI), 7(2), 179–192. https://doi.org/10.30656/jsmi.v7i2.7512
DOI: http://dx.doi.org/10.22441/oe.2025.v17.i1.134
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Operations Excellence: Journal of Applied Industrial Engineering
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal ISSN:
 | Print ISSN: 2085-4293 |
|---|---|
| Online ISSN: 2654-5799 |
Tim Editorial Office
Operations Excellence: Journal of Applied Industrial Engineering
Magister Teknik Industri Universitas Mercu Buana
Jl. Raya Meruya Selatan No. 1 Kembangan Jakarta Barat
Email: [[email protected]]
Website: http://publikasi.mercubuana.ac.id/index.php/oe
Journal DOI: 10.22441/oe
The Journal is Indexed and Journal List Title by:
.png)
.png)
.png)
Operations Excellence: Journal of Applied Industrial Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
>