Sistem Pembelajaran Mandiri untuk Deteksi Anomali pada Proses Radius Shaping Menggunakan Deep Neural Network Berbasis Bidirectional Protocol
DOI:
https://doi.org/10.22441/jte.2025.v16i2.006Kata Kunci:
Bidirectional Protocol, Deep Neural Network, Deteksi Anomali, Radius Shaping, Sistem Pembelajaran MandiriAbstrak
Proses shaping merupakan langkah dalam proses curing atau pemasakan ban setengah jadi (green tire), di mana ban tersebut ditempatkan pada bladder dan diberi tekanan yang sesuai. Dalam proses shaping, nilai tekanan dan dimensi (radius) bladder menjadi parameter utama yang memengaruhi hasil produk. Mesin curing yang digunakan saat ini masih mengadopsi sistem konvensional, memerlukan pemantauan konstan oleh operator untuk mencapai hasil shaping yang optimal dan mengurangi kegagalan dalam proses curing ban. Pantauan mesin curing yang dilakukan secara manual menyebabkan analisis cacat produk tidak optimal, dan penentuan nilai radius yang optimal sulit dilakukan. Oleh karena itu, diperlukan suatu metode agar sistem pemantauan nilai radius shaping dapat mendeteksi dan memberikan rekomendasi untuk parameter shaping yang tepat, seperti nilai radius dan tekanan. Dengan perkembangan teknologi kecerdasan buatan yang pesat di berbagai sektor, termasuk medis, militer, pendidikan, ekonomi, politik, industri, dan lainnya, teknologi ini dapat mengatasi tugas-tugas berbahaya dan berulang. Sejumlah metode AI telah berhasil diimplementasikan dalam industri untuk memastikan produksi yang memenuhi standar kualitas. Dalam konteks ini, penulis mengusulkan penerapan metode AI untuk melakukan analisis terhadap proses radius shaping pada pemasakan ban, dengan tujuan mengurangi kegagalan produksi yang sering disebabkan oleh berbagai faktor, salah satunya adalah kesalahan manusia. Penelitian ini mencakup pengidentifikasian pola atau perubahan yang tidak sesuai dengan kondisi normal yang diharapkan. Merujuk pada metode komunikasi yang memungkinkan aliran informasi dua arah, memungkinkan respons yang lebih cepat dan interaksi yang dinamis antara system deteksi anomali dengan system pembelajaran mandiri.Unduhan
Referensi
J. Wu and S. X.Yang, “Intelligent Control of Bulk Tobacco Curing Schedule Using LS-SVM- and ANFIS-Based Multi-Sensor Data Fusion Approaches,” Sensors, vol. 19, p. 1778, 2019, doi: https://doi.org/10.3390/s19081778.
Y. Wang and L. Qin, “Research on state prediction method of tobacco curing process based on model fusion,” J. Ambient Intell. Humaniz. Comput., no. April, 2021, doi: 10.1007/s12652-021-03129-5.
J. Wu and S. X. Yang, “Modeling of the Bulk Tobacco Flue-Curing Process Using a Deep Learning-Based Method,” IEEE Access, vol. 9, pp. 140424–140436, 2021, doi: 10.1109/ACCESS.2021.3119544.
B. D. SUBIANTORO, PENINGKATAN KINERJA PROGRAMMABLE LOGIC CONTROLMITSUBISHI SERI Q MENGGUNAKAN OPTICAL DISTANCE SENSORO1D100 BERBASIS SISTEM KONTROL SHAPPING. 2019.
B. Sumathy, D. Abinash, D. Aravindan, K. Prasaanth, and D. T. Muralidharan, “Automation of Tire Curing Machine Using IOT,” Indian J. Sci. Technol., vol. 12, no. 29, pp. 1–7, 2019, doi: 10.17485/ijst/2019/v12i29/146978.
Z. Iklima, B. N. Rohman, R. Muwardi, A. Khan, and Z. Arifiansyah, “DEFECT CLASSIFICATION OF RADIUS SHAPING IN THE TIRE CURING PROCESS USING FINE-TUNED DEEP NEURAL NETWORK,” vol. xx, no. x, pp. 1–7.
S. Amini Niaki, E. Haghighat, T. Campbell, A. Poursartip, and R. Vaziri, “Physics-informed neural network for modelling the thermochemical curing process of composite-tool systems during manufacture,” Comput. Methods Appl. Mech. Eng., vol. 384, p. 113959, 2021, doi: 10.1016/j.cma.2021.113959.
J. Zhou, Y. Li, D. Li, and Y. Wen, “Online learning based intelligent temperature control during polymer composites microwave curing process,” Chem. Eng. J., vol. 370, pp. 455–465, 2019, doi: 10.1016/j.cej.2019.03.204.
M. A. Nielsen, “Neural Networks and Deep Learning.” Determination Press, 2015. Accessed: Jan. 18, 2022. [Online]. Available: http://neuralnetworksanddeeplearning.com
John McGonagle, George Shaikouski, Christopher Williams, Andrew Hsu, Jimin Khim, and Aaron Miller, “Backpropagation | Brilliant Math & Science,” Jan. 20, 2020. https://brilliant.org/wiki/backpropagation/ (accessed Jan. 20, 2022).
I. Zendi, “A Microservices-based for Distributed Deep Neural Network of Delta Robot Control System,” 2020 IEEE Int. Conf. Commun. Networks Satell. Comnetsat 2020 - Proc., pp. 218–221, 2020, doi: 10.1109/Comnetsat50391.2020.9328936.
I. Zendi, A. Zody, M. Imam, A. Zody, and A. Khan, “SELF-LEARNING OF DELTA ROBOT USING INVERSE KINEMATICS AND ARTIFICIAL NEURAL NETWORKS,” SINERGI, vol. xx, no. x, pp. 1–7, 2021.
S. Teerapittayanon, B. McDanel, and H. T. Kung, “Distributed Deep Neural Networks over the Cloud, the Edge and End Devices,” Proc. - Int. Conf. Distrib. Comput. Syst., pp. 328–339, 2017, doi: 10.1109/ICDCS.2017.226.
Z. Zhang, “Improved Adam Optimizer for Deep Neural Networks,” 2018 IEEE/ACM 26th Int. Symp. Qual. Serv. IWQoS 2018, pp. 1–2, 2019, doi: 10.1109/IWQoS.2018.8624183.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
