Reducing dandori processing time using the single minute exchange of die method in swaging areas in automotive rubber components company
DOI:
https://doi.org/10.22441/oe.2023.v15.i2.079Keywords:
automotive component, dandori, SMED, set-upAbstract
The automotive component company is engaged in the manufacture of automotive rubber components. Based on data obtained from field observations, it was found that the Dandori process on the swaging Nox machine, especially TA090 type, had the highest downtime compared to another component. Based on these problems, research uses the Single Minute Exchange of Die (SMED) method to reduce Dandori downtime in the TA090 swaging process. The SMED method was carried out in three stages: 1. identify internal and external setup, 2. Converting internal to external setup, and 3. Streamlining aspects of operation. In addition, it also used data processing tools, namely SMART, fishbone, and 5W+1H as support to solve this problem. Improvements were made by converting internal work elements into external ones and streamlining aspects of operation by improving on man, method, and machine/tools categories. The result of these improvements was a decrease in downtime of 39 minutes 48 seconds and the improvement efficiency achieved was 81.2%.Downloads
References
Arifin, D. (2018). Analisis Perbaikan Waktu Setup Dengan Menggunakan Metode SMED Untuk Meningkatkan Produktivitas PT. Trimitra Chitra Hasta. Jurnal KaLIBRASI - Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri., 1(1), 1–14. https://doi.org/10.37721/kalibrasi.v8i0.313
Azwir, H. H., Wijaya, N. C., & Oemar, H. (2021). Implementasi Metode Single Minute Exchange Of Die Untuk Mengurangi Waktu Persiapan dan Penyesuaian Mold di Industri Polimer. JISI: Jurnal Integrasi Sistem Industri, 8(2), 41. https://doi.org/10.24853/jisi.8.2.41-52
Fathia, R. N., Batubara, S., & Safitri, D. M. (2016). Usulan Pengurangan Waktu Setup Menggunakan Metode SMED Serta Pengurangan Waktu Proses Produksi dan Perakitan Menggunakan Metode MOST di PT. Panasonic Manufacturing Indonesia. Jurnal Teknik Industri, 6(2), 187–196. https://doi.org/10.25105/jti.v6i2.1543
Hien N. Nguyen, & Nhan H. Huynh. (2019). Optimizing equipment efficiency: An application of SMED methodology for SMEs. The Journal of Agriculture and Development, 18(3), 1–9. https://doi.org/10.52997/jad.1.03.2019
Ibrahim, I., Arifin, D., & Khairunnisa, A. (2020). Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dengan Tahapan DMAIC Untuk Mengurangi Jumlah Cacat Pada Produk Vibrating Roller Compactor Di PT. Sakai Indonesia. Jurnal KaLIBRASI - Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri., 3(1), 18–36. https://doi.org/10.37721/kal.v3i1.639
Ikatrinasari, Z. F., Hasibuan, S., & Kosasih, K. (2018). The Implementation Lean and Green Manufacturing through Sustainable Value Stream Mapping. International Conference on Design, Engineering and Computer Sciences, 453(1), 1–9. https://doi.org/10.1088/1757-899X/453/1/012004
Nurrizky, M. F., Septiana, M. A., Machmudin, J., & Syafii, M. (2021). Peningkatan Efisiensi Mesin Cnc Turning Menggunakan Metode Single Minutes Exchange of Dies di PT.X. Jurnal Ilmiah Teknologi Infomasi Terapan, 7(2), 94–100. https://doi.org/10.33197/jitter.vol7.iss2.2021.526
Pratama, W., Yanuar, A. A., & Rendra, M. (2019). Proposed Improvement To Minimize Motion Waste in Production of Head Casing Part at PT. Multi Instrumensi With Lean Manufacturing Approach. Quantum Teknika : Jurnal Teknik Mesin Terapan, 1(1), 33–38. https://doi.org/10.18196/jqt.010106
Runtuk, J. K., & Sembiring, N. (2021). Set Up Time Reduction Using Single Minute Exchange of Dies (SMED) and 5S: A Case Study. JIE Scientific Journal on Research and Application of Industrial System, 6(2), 162. https://doi.org/10.33021/jie.v6i2.3384
Sahin, R., & Kologlu, A. (2022). A Case Study on Reducing Setup Time Using SMED on a Turning Line. Gazi University Journal of Science, 35(1), 60–71. https://doi.org/10.35378/gujs.735969
Setiawan, L., & Hasibuan, S. (2021). Improve Ramp-Up Performance on the Sewing Process in a Sports Shoe Factory Using 8-Disciplines and Lean Manufacturing. Quality Innovation Prosperity, 25(2), 19–36. https://doi.org/10.12776/qip.v25i2.1516
Setyawan, L. (2019). Increasing the production capacity of copper drawing machine in the cable industry using SMED method: A case study in Indonesia. Operations Excellence: Journal of Applied Industrial Engineering, 11(3), 217. https://doi.org/10.22441/oe.v11.3.2019.031
Silva, A., Sá, J. C., Santos, G., Silva, F. J. G., Ferreira, L. P., & Pereira, M. T. (2021). A comparison of the application of the smed methodology in two different cutting lines. Quality Innovation Prosperity, 25(1), 124–149. https://doi.org/10.12776/QIP.V25I1.1446
Sousa, E., Silva, F. J. G., Ferreira, L. P., Pereira, M. T., Gouveia, R., & Silva, R. P. (2018). Applying SMED methodology in cork stoppers production. Procedia Manufacturing, 17, 611–622. https://doi.org/10.1016/j.promfg.2018.10.103
Supriyati, Wiyatno, T. N., & Darmawan, H. (2021). Increase of plastic injection production using Overall Equipment Effectiveness and Single Minute Exchange of Dies Analysis. Operations Excellence: Journal of Applied Industrial Engineering, 2021(3), 394–406. https://doi.org/10.22441/oe.2021.v13.i3.036
Suryaprakash, M., Gomathi Prabha, M., Yuvaraja, M., & Rishi Revanth, R. V. (2020). Improvement of overall equipment effectiveness of machining centre using tpm. Materials Today: Proceedings, 46(19), 9348–9353. https://doi.org/10.1016/j.matpr.2020.02.820
Talekar, Patil, Shinde, Waghmare. (2019). Setup Time Reduction using Single Minute Exchange of Dies (SMED) at a Forging Line. 1st International Conference on Manufacturing, Material Science and Engineering (ICMMSE-2019)AIP Conf. Proc. 2200, 020018-1–020018-6; https://doi.org/10.1063/1.5141188
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under CC BY-SA
A Creative Commons Attribution-ShareAlike (CC BY-SA) license allows you to use, share, and build upon a creator's work for any purpose—including commercial use—as long as you follow specific rules.
.png)
.png)
.png)
